Cooling Tower | RCC Cooling Tower

Cooling tower is a specialized heat exchange in which air and water are brought into direct contact with each other in order to reduce the water's temperature. Supertech Cooling Towers Pvt Ltd. -  Cooling Towers have a high cooling capacity with low energy consumption Besides manufacturing, FRP Cooling Tower, Wooden Cooling Tower, FRP  Pultruded Draft Cooling Tower, FRP Natural Draft Cooling Tower, RCC Cooling Tower and more.

Industrial cooling towers can be used to remove heat from various sources such as machinery or heated process material. The primary use of large, industrial cooling towers is to remove the heat absorbed in the circulating cooling water systems used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants, and for other industrial facilities such as in condensers of distillation columns, for cooling liquid in crystallization, etc

RCC COOLING TOWER
RCC (Reinforced Cement Concrete) is a composite material of steel and concrete, capable of Resisting Compressive, bending and shear forces. They can withstand high wind loads. RCC cooling towers can be constructed both in cross flow and counter flow design. Supertech offers high quality of RCC Cooling Towers for Power Plants, Cement Plants, Sugar Plants, etc.


cooling tower, rcc cooling tower, frp cooling tower, wooden cooling tower


Location: Faridabad, Haryana, India

Comments

Post a Comment

Popular posts from this blog

Cooling Tower | Super Cooling Tower

Supertech Cooling Tower Heat Transfers Methods - 1. Wet cooling towers (or open circuit cooling towers) - operate on the principle of evaporation cooling. The working fluid and the evaporated fluid (usually water) are one and the same. 2. Closed circuit cooling towers (or fluid coolers) - pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is close to that of a wet cooling tower, with the advantage of protecting the working fluid from environmental exposure and contamination. 3. Dry cooling towers - are closed circuit cooling towers which operate by heat transfer through a surface that separates the working fluid from ambient air, such as in a tube to air heat exchanges, utilizing convective heat transfer. They do not use evaporation. 4.H ybrid cooling towers - are closed circuit cooling towers that can switch between wet and dry operation. This helps balance water and e...
Read more

FRP Cooling Tower | RCC Cooling Tower

Image
Supertech Cooling Towers Casing of FRP: The tower casing designed with fiberglass reinforced plastic is known as frp cooling tower. It is extremely corrosion resistant. It offers enough constructional power to stand firm against vibration and high wind velocity. Casing designed in sections properly matches at aerodynamic contours and works, which are accomplished for best performance. If you want to buy the best cooling tower, you need to visit the best and reliable frp cooling tower manufacturer. FRP Cooling Tower The frp cooling towers India is designed with fiberglass reinforced plastic and highly resistant to corrosion. The fiberglass reinforced plastic is a blended material. The fibers used in the blend are carbon or amid, glass, wood, paper and more. The important facts of frp cooling tower are as follows, 1.The Pultruded FRP is designed using pultrusion technology and this has become the most 2.general and preferable constructional material for small cooling towers. ...
Read more