Supertech Cooling Tower | FRP Cooling Tower | Cooling Tower

Supertech cooling Towers

Classification by build


1. Package cooling tower
These types of cooling towers are factory preassembled, and can be simply transported on trucks, as they are compact machines. The capacity of package type towers is limited and, for that reason, they are usually preferred by facilities with low heat rejection requirements such as food processing plants, textile plants, some chemical processing plants, or buildings like hospitals, hotels, malls, automotive factories etc.

Due to their frequent use in or near residential areas, sound level control is a relatively more important issue for package type cooling towers.

2. Field erected type
Facilities such as power plants, steel processing plants, petroleum refineries, or petrochemical plants usually install field erected type cooling towers due to their greater capacity for heat rejection. Field erected towers are usually much larger in size compared to the package type cooling towers.

A typical field erected cooling tower has a pultruded fiber-reinforced plastic (FRP) structure, FRP cladding, a mechanical unit for air draft, drift eliminator

cooling tower, cooling towers, frp cooling tower, wooden cooling tower, coolwell cooling tower, rcc cooling tower,
Location: TCC-B1, Sector 10 HBC, Faridabad, Haryana 121006, India

Comments

Post a Comment

Popular posts from this blog

Cooling Tower | RCC Cooling Tower

Image
Cooling tower is a specialized heat exchange in which air and water are brought into direct contact with each other in order to reduce the water's temperature. Supertech Cooling Towers Pvt Ltd. -  Cooling Towers have a high cooling capacity with low energy consumption Besides manufacturing, FRP Cooling Tower, Wooden Cooling Tower , FRP  Pultruded Draft Cooling Tower, FRP Natural Draft Cooling Tower, RCC Cooling Tower and more. Industrial cooling towers can be used to remove heat from various sources such as machinery or heated process material. The primary use of large, industrial cooling towers is to remove the heat absorbed in the circulating cooling water systems used in power plants, petroleum refineries, petrochemical plants, natural gas processing plants, food processing plants, semi-conductor plants, and for other industrial facilities such as in condensers of distillation columns, for cooling liquid in crystallization, etc RCC COOLING TOWER RCC (Reinforced Cement Co
Read more

Cooling Tower | Super Cooling Tower

Supertech Cooling Tower Heat Transfers Methods - 1. Wet cooling towers (or open circuit cooling towers) - operate on the principle of evaporation cooling. The working fluid and the evaporated fluid (usually water) are one and the same. 2. Closed circuit cooling towers (or fluid coolers) - pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is close to that of a wet cooling tower, with the advantage of protecting the working fluid from environmental exposure and contamination. 3. Dry cooling towers - are closed circuit cooling towers which operate by heat transfer through a surface that separates the working fluid from ambient air, such as in a tube to air heat exchanges, utilizing convective heat transfer. They do not use evaporation. 4.H ybrid cooling towers - are closed circuit cooling towers that can switch between wet and dry operation. This helps balance water and e
Read more